RSS feeds in the directory: 2799
Added today: 0
Added yesterday: 0
#Clabucet #disappear #hob #consequences #of reasons for Providing mobility of suspension parts, silent block is an important component of the car. He absorbs oscillations and vibrations between the mechanical parts of the car, and along with shock absorbers, increases the comfort of driver and passenger during the ride. What will happen if there is no cushion, and how to check the serviceability of the part, consider the following.
a unit bushings
Metal bushing with a rubber insert located between them, provide the connection of nodes in the front and rear suspensions. Agree, the detail is a simple device, but it takes all the shock load on the car body. Physical deterioration of the site – about 100 thousand kilometers, but in the realities of our roads, the replacement may need before.
the Insert between the bushings is made from two kinds of material:
rubber. Low cost and smooth movement of the vehicle on a road, considered the main advantages of the bushings with a rubber insert.
the Polyurethane. The high cost of the part, which is based on polyurethane, kompensiruet long service to the bushings.
this Part is made of polyurethane
time to change the bushing
Historically, what drivers of change are important units of the car after they finally fail. Faulty item will not only adversely affects other parts of the vehicle, but also creates potential danger for all road users. On what grounds can determine that it's time to change silent blocks:
the ride Comfort. When cornering, felt a large roll of any road irregularity is felt by all present in the car.
the tire Wear. Rapid and uneven tire wear.
the Noise characteristics. The creaking of iron could be clearly heard in the cabin.
a Visual inspection. Rubber splits, cracks.
the Front arm near the bushings
Replaceable with your own hands or turn to STO
To replace the bushings with your hands you will need:
If there is not a required tool, it doesn't matter. All can be purchased in the car market for a nominal price. The whole work consists of several stages:
by means of a Jack raise the right wheel and remove it.
Unscrew the nut of the upper ball joint. Remove it.
Remove the top lever and bushing, press-fitted in it's place a new one.
Lubricates the axis of lever grease and screw it into place.
Replacement silent block:
But any experienced driver will advise you to contact the professionals. In each car the centre of a HUNDRED, there is you not only to quickly and correctly change the item, but will do after this alignment of the wheels. After the procedure of intervention in the suspension, this must be done to the car is not "taken away" in the direction of movement.
the Worn bushing: implications for car
As mentioned above, the bushing press-fitted into the hole of the lever, and becomes almost homogeneous part of this site. But worn-out item may not only degrade the quality of movement of the car, but also to affect the performance of other components of the vehicle.
the deformation of the lever mounting, which entails costly repairs.
Degraded vehicle handling and could cause an emergency on the road.
the suspension is accompanied by a knocking suspension and squeaks.
the Most important thing on the road – handling and stability of the vehicle. Substandard work bushings affect the operation of the undercarriage of the car, which leads to deterioration in grip and increase braking distance. It needs to be remembered and in a timely manner to change the node during the passage of vehicle maintenance.
Falling silent in the car
4 reasons exit bushings down
Huge lifetime items, not to mention the eternal use of the site. Like any consumable, it requires replacement. Consider the main causes of the output bushings of the system:
rubber. Elastic filling between the metal sleeves of the part dries, starts to crack and tear. This applies to inserts and polyurethane, which is superior to its technical characteristics of the tires 4 times.
Aggressive operating environment. The operation of the vehicle on-site factories, mines or chemical plants entails premature wear of the part.
Setting. Improperly switching node reduces the time of service details to a third of the guaranteed line.
the Manufacturer. When you purchase should pay attention to a brand and to refrain from shopping in questionable places. Major car dealers value their reputation and do not sell substandard products.
the Independent replacement bushings in the garage
Now you know what will happen if there is no bushing. Do not forget to make a planned technical inspection of the car. After a sharp jolt on the road can bring out the poor quality bushing failure and lead to unwanted emergencies.
What to do when one earphone is not working? 10.07.2018 at 18:21
Glycerine: what is it for? Applications in agriculture, cosmetics and medicine 10.07.2018 at 18:11
What is in the car? The main components of a modern car and home appliances 10.07.2018 at 18:06
The cruise on the ship "Dmitry Furmanov". Kalyazin or as we cheered for our 10.07.2018 at 17:29
What to drink the gin: secrets of drinking 05.07.2018 at 19:16
Where did God? Who created It? 05.07.2018 at 19:13
How can I make permanent formwork 05.07.2018 at 19:11